Site

Search results

  1. Phosphorus Nutrient Management for Yield and Reduced P Loss at Edge of Field

    https://ohioline.osu.edu/factsheet/agf-509

    site and rate criteria from Assessing Nutrient Loss Risk in Ohio (NRCS) between 50 to 200 PPM. Time ... step 7. STP value of 50 PPM Mehlich III or less: CROP YIELD —Reduce risk of crop yield losses with ... available. The maintenance STP range is "critical level" to 40 PPM in corn soybean rotation and 50 ...

  2. Interpreting a Soil Test Report

    https://ohioline.osu.edu/factsheet/agf-0514

    suitability to grow a chosen crop. Phosphorous and potassium soil test levels help us know if fertilizer is ... are rare in Ohio. Magnesium (Mg) 50–1,000 100–2,000 Levels less than 20 ppm are a concern. Dolomitic ... recommendation tables, a conversion of P and K soil test values is needed if they are not reported as ppm using ...

  3. Fertilizing Perennial Forages on Dairy Farms

    https://dairy.osu.edu/newsletter/buckeye-dairy-news/volume-24-issue-4/fertilizing-perennial-forages-dairy-farms

    test P exceeds the agronomic level of 50 ppm, there is increased  potential of P losses into streams ... Many dairy farms have high levels of soil P, making the expense of fertilizer P unnecessary. When soil ... harm animals fed those forages. A recent soil test should always guide what nutrients to apply and how ...

  4. Converting between Mehlich-3, Bray P, and Ammonium Acetate Soil Test Values

    https://ohioline.osu.edu/factsheet/anr-75

    Bray P. When only soil test values in the agronomic range were considered (less than 50 ppm Bray P), ... relationships between Mehlich-3, Bray P, and Ammonium Acetate soil test extractants in the Tri-State Region. ... 3–1170 ppm, and Mehlich-3 K values ranged from 25–899 ppm. We examined relationships with all soil test ...

  5. Ohio Data that Shaped the Tri-State Fertilizer Recommendations

    https://ohioline.osu.edu/factsheet/agf-518

    that very low soil test levels require high fertilizer rates, but as soil test levels increase, our ... able to answer the question, “At what soil test level should I apply fertilizer to see a yield ... response?” To answer this question, we need to establish a critical soil test level.  For each trial, we ...

  6. Grapevine Nutrient Management: Petiole Sampling and Analysis

    https://ohioline.osu.edu/factsheet/hyg-1438

    availability. However, there is a poor relationship between soil and plant nutrient levels. While a soil may be ... adequate levels of another nutrient while the soil test indicates a deficiency. This poor relationship may ... Manganese (Mn) 25–1,000 ppm 3 31–150 ppm Iron (Fe) 30–100 ppm 31–50 ppm Copper (Cu) 5–15 ppm 5–15 ppm Boron ...

  7. Baseline Assessment of Soil Health in Ohio now available

    https://soilhealth.osu.edu/news/baseline-assessment-soil-health-ohio-now-available

    general, soil test levels were in optimal ranges for grain crops in Ohio (Culman et al., 2020). Soil ... soil health value is essential for understanding these tests and inferring soil function. A common ... organic matter ranged from 0.1 to 9.8% for these soils, with 50% of the values falling below and 50% of ...

  8. Corn Silage and Foliar Disease

    https://dairy.osu.edu/newsletter/buckeye-dairy-news/volume-24-issue-4/corn-silage-and-foliar-disease

    contamination of corn silage and high moisture corn with many nutritionists encouraging levels below 1 ppm in ... with DON levels as high as 17.9 ppm in one hybrid and 30.3 ppm in the other hybrid. Again, fungicide ... by at least 50%. The trial was then expanded the second year, which was a high disease pressure year ...

  9. Developing Phosphorus and Potassium Recommendations for Field Crops

    https://ohioline.osu.edu/factsheet/AGF-515

    + (0.05 x CEC))] + (YP x CR) + 20 CL is the critical level (100 ppm at a CEC of 10), STL is the soil test ... test results are based on soil calibration studies that correlate soil test levels to crop yield ... crop (buildup stage). Once soil test values reach the critical soil test level, a maintenance approach ...

  10. Calculating Cation Exchange Capacity, Base Saturation, and Calcium Saturation

    https://ohioline.osu.edu/factsheet/anr-81

    example of typical soil test levels in Ohio (in ppm). We can calculate the collective charge each cation ... by the soil test levels. For calcium, a soil test level of 2000 ppm, divided by 200 equals 10.0 ... (ppm) to meq/100 g soil for base and acid cations to determine CEC. Base Cation Soil test level (ppm ...

Pages